Aspect ratios in film are width divided by height. See where 1.375, 1.85, 2.39, 16:9, IMAX and 9:16 came from, and the containers cinemas and Netflix expect.
Method. Sources checked November 18, 2026: SMPE/SMPTE aperture standards as recorded by the American WideScreen Museum, IMAX, Netflix Partner Help Center delivery specifications, and the YouTube, Instagram and TikTok help pages. Pixel dimensions not named in a spec are calculated using Netflix's rounding rule. Vinc makes an AI film studio.
What an aspect ratio means
An aspect ratio is the width of the picture divided by its height. Cinema usually writes it as a decimal against 1 (1.85:1, 2.39:1). Television and the web usually write whole numbers (16:9, 9:16). 16:9 works out to 1.78:1, and 4:3 to 1.33:1.
Four common shapes drawn at the same height: 4:3 (1.33), 16:9 (1.78), anamorphic scope (2.39) and vertical 9:16.
Most ratios in use today were set by a physical constraint: a soundtrack printed on the film, a projector gate, a splice, or a phone held upright. Below is where each came from, the standard that fixed it, and how it maps onto the pixel containers cinemas and Netflix require.
1.33 to 1.375: how sound shaped the Academy ratio
Silent 35 mm film used a frame of about 1.33:1. When sound-on-film arrived, the soundtrack was printed as a stripe running just inside one row of perforations, and it cut into that image. Film histories cited by Wikipedia (James Monaco, How to Read a Film; Bordwell and Thompson, Film Art) note that the resulting frame was taller, usually around 1.19:1.
The Academy of Motion Picture Arts and Sciences fixed this by lowering the frame height to bring back a familiar shape. The agreed projector aperture was 0.825 × 0.600 inches, which gives 1.375:1, usually written 1.37.
Silent 35 mm at about 1.33, the taller frame of about 1.19 left once the soundtrack took its stripe, and the Academy's 1.375 (drawn as 1.37) that restored a familiar shape.
The Journal of the SMPE (vol. XIX, July 1932, p. 924) records that on May 9, 1932, the Society of Motion Picture Engineers adopted the same projector aperture as a standard. The American WideScreen Museum gives the matching camera aperture as 0.864 × 0.630 inches. Projection cropped a little off the camera frame, a practice that continues today as "protection" around the intended image.
The Academy ratio was the studio standard for about twenty years, until the widescreen changes of 1953 made it obsolete as a production format.
1.85 vs 2.39: flat and anamorphic widescreen (1953)
Cinerama's success in 1952 pushed the studios to go wider, according to the American WideScreen Museum. The quickest way was to crop. Paramount released Shane (1953), which was shot in the Academy frame and cropped top and bottom to 1.66:1 for projection on larger new screens. Universal-International and Columbia went further, to 1.85:1.
Both are "flat" (spherical) formats. The full width of the frame is used, and height is masked off. Standard projector apertures were later set at 0.825 × 0.446 inches for 1.85 and 0.825 × 0.491 inches for 1.66. The museum notes that the "vast majority of non-anamorphic films" are now composed for 1.85:1. Europe settled on 1.66:1 first, for economic reasons, and has since moved to 1.85 as a de facto standard.
The other route to a wide picture was to squeeze it. Henri Chrétien's "Hypergonar" lenses compressed the image horizontally by 2× on the negative, and a matching lens on the projector stretched it back out. 20th Century-Fox bought the rights and named the system CinemaScope. The Robe premiered on September 16, 1953.
A 2× anamorphic lens squeezes the wide scene onto the negative; a matching lens on the projector stretches it back out.
Successive standards changed the projected shape. The figures below are the SMPTE projection apertures recorded by the American WideScreen Museum. Each ratio is the aperture width divided by its height, multiplied by the 2× squeeze.
Standard
Projector aperture (in)
Unsqueezed ratio
Note
PH22.104-1957
0.912 × 0.715
2.55:1
Early CinemaScope with 4-track magnetic sound; withdrawal noted in 1964
PH22.106-1957
0.839 × 0.715
2.35:1
The "2.35" most people still quote
PH22.106-1971
0.838 × 0.700
2.39:1
Height reduced "to minimize the flashes at splices"; drafted September 1970
SMPTE 195-1993
0.825 × 0.690
2.39:1
Same 0.825 in width as flat formats
The move from 2.35 to 2.39 happened in the projector, not the camera. Scope prints have very little space between frames, so splice marks flashed on screen. Reducing the gate height hid them. So "2.35", "2.39" and "2.40" usually mean the same anamorphic format. 2.39 is the current standard figure, and 2.40 is a rounding of it.
16:9: a compromise designed in 1984
High-definition television needed one shape that could carry everything. Kerns Powers, a member of SMPTE's Working Group on High-Definition Electronic Production, proposed 16:9 (1.78:1) in 1984. His method, as summarised on Wikipedia, was to cut out rectangles of equal area in each popular ratio of the time: 4:3, 1.66, 1.85 and 2.35. He overlaid them with their centers aligned and found that the shape enclosing them all was about 1.78:1.
The ratio is often called the geometric mean of the two extremes, though sources disagree on which. √(4/3 × 2.35) = 1.770 matches 16:9 (1.778) closely; √(4/3 × 2.40) = 1.789, the version in Wikipedia's text, is further off. Either way, 16:9 is a compromise: wider films are letterboxed inside it, narrower ones pillarboxed.
IMAX: 1.43 and 1.90
IMAX has its own two ratios. IMAX says filmmakers "shoot specifically with IMAX's 1.90:1 or 1.43:1 aspect ratios in mind", using scenes that "open vertically to fill the entire IMAX screen".
The 1.43:1 shape belongs to 15-perforation 70 mm film. For Oppenheimer, IMAX said sequences shot on IMAX film cameras "will expand images up to a 1.43:1 aspect ratio" in 15-perf/70mm venues. 1.90:1 is the digital IMAX shape. It is very close to the full DCI 4K container of 4096 × 2160 pixels, which works out to 1.896:1.
In both cases a film usually switches ratio mid-film. Only the IMAX-shot sequences open up, and the rest stays at a conventional ratio.
The three shapes an IMAX release can switch between, drawn at the same height: 2.39 scope, 1.90 digital IMAX and 1.43 IMAX 15/70 film.
9:16 vertical video: the aspect ratio for Reels, Shorts and TikTok
Phone-first platforms turned the frame upright. Their official help pages give these limits:
YouTube Shorts. Videos uploaded after October 15, 2024 count as Shorts if they have "a square or vertical aspect ratio" and run up to three minutes.
Instagram Reels. "You can upload a reel with an aspect ratio between 1.91:1 and 9:16." Reels "should have a minimum frame rate of 30 FPS" and a minimum resolution of 720 pixels.
TikTok (in-feed ads). Vertical 9:16 is "recommended", at a minimum of 540 × 960 px. Horizontal 16:9 (at least 960 × 540) and square 1:1 (at least 640 × 640) are also accepted.
None of these pages names 1080 × 1920 as a requirement, although that size is widely used. AI video tools follow the same pattern. Google's Veo 3.1 supports 16:9 and 9:16 only. Runway Gen-4.5 offers 16:9 (1280 × 720), 9:16 (720 × 1280) and a 21:9 option at 1584 × 672, which works out to 2.36:1.
Shooting wide and cropping to vertical costs a lot of picture. A full-height 9:16 window cut from a 3840 × 2160 UHD frame is 1215 pixels wide, about 31.6% of the frame. If vertical is a main deliverable, frame for it on set or generate it natively. Don't plan to crop it later.
Delivery: cinema containers and Netflix's rules
Digital cinema doesn't project arbitrary shapes. It uses fixed pixel containers. Netflix's DCP specification is explicit:
4K packages "must be DCI 4K container resolution, either 3996x2160 (1.85/Flat) or 4096x1716 (2.39/Scope)." 2K equivalents (1998 × 1080 and 2048 × 858) need prior approval.
1.85 and 2.39 content must fill its container edge to edge.
Content "less than 2.30 (e.g. 2.00, 1.89, 1.78, 1.66, 1.33)" is fitted into the Flat container. Content at 2.30 or wider goes into Scope. The rest is padded with black: "Do not crop or 'blow-up' the image to fill the container."
The two DCI containers drawn at the same height, Flat (1.85) and Scope (2.39), and a 2.00 film. Under Netflix's rule the 2.00 film goes in the Flat container's full width, with black above and below rather than a crop.
For streaming, Netflix's framing guide gives a "UHD IMF at 3840x2160" as the final deliverable; a 2.00:1 show has an active image of 3840 × 1920, "letterboxed in the IMF container". Netflix's calculator rounds odd pixel counts to the nearest integer and then up to the next even number, and the table below uses that rule.
Ratio
Where it's used
In a DCI Flat/Scope container (Netflix rule)
Active area in UHD 3840 × 2160
1.33 (4:3)
Silent era, SD television
2880 × 2160 in Flat
2880 × 2160 (pillarboxed)
1.375
Academy, 1932–1953
2970 × 2160 in Flat
2970 × 2160 (pillarboxed)
1.43
IMAX 15/70 film
3090 × 2160 in Flat
3090 × 2160 (pillarboxed)
1.66
European flat
3586 × 2160 in Flat
3586 × 2160 (pillarboxed)
1.78 (16:9)
HD/UHD television
3840 × 2160 in Flat
3840 × 2160 (full frame)
1.85
US flat widescreen
3996 × 2160 (Flat)
3840 × 2076 (letterboxed)
1.90
IMAX digital
3996 × 2104 in Flat
3840 × 2022 (letterboxed)
2.00
Common streaming ratio
3996 × 1998 in Flat
3840 × 1920 (letterboxed)
2.39
Anamorphic scope
4096 × 1716 (Scope)
3840 × 1608 (letterboxed)
9:16
Shorts, Reels, TikTok
n/a
1216 × 2160 if cropped; deliver natively as 2160 × 3840 or 1080 × 1920
Bold values are the container sizes named in Netflix's specification. The others are calculated.
How much picture each ratio gives you
At a fixed width, picture area depends only on height. A wider ratio gives a shorter frame, which means less picture. With 16:9 as the baseline of 100:
Picture area at the same width, 16:9 = 100
1.33 (4:3)133
1.375 Academy129
1.43 IMAX film124
1.66107
1.78 (16:9)100
1.8596
1.90 IMAX digital94
2.0089
2.39 Scope74
Calculated: area is proportional to 1 / aspect ratio at a fixed width. 9:16 vertical at the same width would be 316.
That arithmetic explains IMAX's selling point. When a 2.39 film opens up to 1.90 or 1.43 at the same screen width, the picture grows taller. A 1.43 frame has about 1.67 times the area of a 2.39 frame of the same width. It also explains why "wider" does not mean "bigger": on a 16:9 television, a 2.39 film uses only three-quarters of the screen.
Choosing a ratio is therefore choosing which part of the scene you show. Wide ratios give more room for landscapes and for two people in one frame. Tall ratios give more room for faces, height and vertical space.
Sources
Anonymous, "Society Announcements: New Dimensional Standards", Journal of the SMPE, vol. XIX, July 1932, p. 924, as cited in Wikipedia: Academy ratio
James Monaco, How to Read a Film, Oxford University Press, 1981; David Bordwell and Kristin Thompson, Film Art: An Introduction, McGraw-Hill, 1993, as cited in Wikipedia: Academy ratio
Atmosphere, Light Quality and Texture: Hard vs Soft Light, Haze, God Rays, Rain and Practicals
Haze, god rays, rain, moonlight, neon, crushed blacks and wet streets each describe something physical: particles in the air, the sun's angle, a gas's emission lines, a black point or the angle at which water reflects. This article defines each term with figures from meteorologists, physicists, manufacturers and cinematographers, then shows how the Google, LTX, Luma, Kling and Runway prompt guides phrase it.