
Shutter angle vs shutter speed: at 24 fps a 180° shutter means 1/48 s. The formula, where 24, 25, 29.97 and 23.976 fps came from, and flicker-free settings.
Film LabTry the shutter angle and motion blur →
Method. Sources checked November 18, 2026: 1929 SMPE Transactions, American Cinematographer, RED and ARRI technical documents, Netflix's DCP specification, broadcast engineering references, and Google and Runway model documentation. Shutter tables are calculated from the standard formula. Vinc makes an AI film studio.
Two numbers decide how motion looks
Shutter angle and shutter speed describe the same thing, how long each frame is exposed; the angle states it relative to the frame rate. The frame rate is how many frames are recorded each second and sets how finely motion is sampled. The shutter angle sets how much each frame smears that motion into blur.
The "film look" is mostly one pairing: 24 frames per second with a 180° shutter, which exposes each frame for 1/48 of a second. That pairing is a standard, not a law of nature. It came out of 1920s sound engineering and still shapes how AI video models are built.
Why film is 24 frames per second
Silent films had no fixed speed: cameras were cranked by hand, at stated rates "anywhere from 16 to 24 FPS" (Wikipedia, citing film historians). Sound ended that, because recorded speech only plays back correctly at a constant speed. In the 1929 Transactions of the Society of Motion Picture Engineers, one speaker says: "In sound film, 24 pictures is rigidly definite and susceptible of standardization." Read and Meyer's Restoration of Motion Picture Film (2000) dates the change to 1927–1930.
Why 24 and not 20 or 30 is less clear. Wikipedia calls it "a compromise", close to the 22–26 fps many theaters already used; Production Expert says 24 was fast enough for an optical soundtrack. We found no primary document that settles it.
23.976 vs 24, 25 and 29.97 fps: television's numbers
Television locked its rates to mains electricity, because early studio lamps "would interfere visually with the television picture due to the frequency of electrical mains supplies" (The Broadcast Bridge). Two interlaced fields make a frame, so 50 Hz Europe got 25 frames per second and 60 Hz America got 30.








