Plan where actors and cameras go on an overhead plan that respects the 180° line.
Covers: How to block a scene: the short answer · What blocking decides · Draw the overhead plan
Block a scene before you shoot or generate it: where actors start, move and end, where each camera goes, and the 180° line, all drawn on one overhead plan.
Method. Definitions quoted from MIT's Film Lexicon, checked November 18, 2026, with our 180-degree rule and composition lessons for the textbook sources. The plan method and worked example are ours. Vinc makes an AI film studio.
How to block a scene: the short answer
Draw the set from above. Mark where each actor starts, moves and ends, with numbered positions and arrows. Draw the line between your characters (or between a character and what they're looking at) and put every camera on one side of it. Then check each storyboard shot against the plan: is the camera on the right side, and does everyone face the way they did in the last shot?
MIT's Film Lexicon defines blocking as "the arrangement of the characters' positions and movements in a shot or sequence" (MIT). For a short film, blocking answers four questions:
Question
Write down
Where does each actor start?
Position 1, with which way they face
Where do they move, and on which beat?
An arrow, labelled with the beat ("on seeing the letter")
Where do they end?
The last position, and what they're holding
Where's the camera for each shot?
A numbered camera mark with a wedge for the lens direction
Block the actors first, then place the cameras to cover what they do. If you place cameras first, actors end up moving to suit the lens instead of the story.
Draw the overhead plan
Overhead plan
An overhead plan (also called a floor plan or blocking diagram) is a drawing of the set seen from above, showing walls, doors, windows and furniture, the actors' positions and paths, and every camera position. Our storyboards and shot lists lesson covers its history and uses.
How to draw one:
Draw the room as a rectangle. Mark the doors, windows and the main light source (often the window).
Add the furniture that the action touches: table, chairs, counter.
Mark the actors. A circle with a short line for the nose shows which way they face. Number each position: M1, M2, M3.
Try it
Draw an overhead plan with actor marks, moves, the line and numbered cameras, then check every storyboard panel against it.
Draw the moves as arrows between positions, with the beat written on each arrow.
Draw the line (see below).
Place the cameras. A small numbered box with a V-shaped wedge showing what the lens sees. Number them to match the shot list.
Mark
A mark is the exact spot where an actor stops or lands on a move; on a real set it is often marked on the floor. On the overhead plan, marks are your numbered positions. In AI work, there's no tape, so the mark becomes part of the prompt ("standing at the counter, facing the window").
The 180° line
Axis of action
The axis of action, or 180-degree line, is an invisible line through the scene, usually between two characters. MIT's Film Lexicon says "The camera can shoot from any position within one side of that line, but it may never cross it", because "This convention ensures that the shot will have consistent spatial relations and screen directions."
An overhead plan: the line runs through the two subjects, and every planned camera stays on one side, so screen direction holds from cut to cut.
With one character, draw the line between the character and the thing they're looking at: a window, a door, another room. The audience still needs to know which side of the frame that thing is on.
Eyeline
An eyeline is the direction a character is looking, which tells the audience where the thing they're looking at is. If Maya looks to frame right in one shot, the window must be frame right in the next. Our 180-degree rule lesson covers the eyeline match and the accepted ways to cross the line.
Screen direction
Screen direction is the way a character faces or moves across the frame. If someone exits frame left, the audience expects them to enter the next shot from frame right. Keep a note on your plan: "door = frame left, window = frame right".
Leave room in the frame
Blocking decides where people are in the room; composition decides where they are in the frame. One rule matters most for a beginner: give a character space in the direction they're looking or moving.
Lead room: leave space in front of a character's eyeline or movement. A character pressed against the edge they face feels trapped.
The room. A small kitchen, roughly square. The door is in the left wall (west), the window in the right wall (east), the counter with the kettle along the back wall (north), and the table with two chairs in the middle. The mustard raincoat hangs on the chair nearest the door. Dawn light comes from the window.
The line. Between Maya at the table and the window. All cameras stay on the south side, the side facing the counter. Screen-direction note: door = frame left, window = frame right, in every shot.
The Letter's line runs from Maya at the table to the window. Every camera sits on the same side, so the window is always frame right and the door frame left.
Maya's marks.
Mark
Where
Facing
When (beat)
Shots
M1
Doorway
Into the room
Enters
1A
M2
Counter, by the kettle
Back wall, then a glance to the window (frame right)
Fills the kettle
1A–1B
M3
Standing by the table
Down at the envelope
Sees it, stops, turns it over
1D–1E
M4
Seated at the table, chair facing the window
Down, then up to frame right
Opens it, reads, looks up, laughs
1F–1J
M5
Counter
Kettle
Switches it off
1K
M6
Chair by the door, then out
Frame left
Takes the raincoat, exits
1K
Camera marks.
Camera
Position
Lens feel
Shots
C1
South-west corner, by the door, eye level
Wide
1A, 1L (same frame, so the ending echoes the opening)
C2
South side, facing the counter
Normal
1B, 1K
C3
Above the table, looking down
Close
1C, 1E, 1G
C4
South side of the table, facing Maya's left side
Slightly long
1D, 1F, 1H, 1J
C5
Behind Maya's shoulder, towards the window
Long
1I (her point of view)
C5 is the only camera close to the line. It sits just behind Maya on the south side, so the postcard still appears in the direction she looked.
Do it in Vinc
Open a shot in the 3D Studio on Block every shot in 3D. Place the characters on the set, place the camera and pick the lens before anything renders, then Save & render guide. Use your overhead plan to place each camera mark.
How we compiled this
Definitions of blocking and the axis of action are quoted from MIT's Film Lexicon, read on 18 November 2026. The 180-degree rule, eyeline match and screen direction are covered in more depth, with textbook sources, in our 180-degree rule lesson. The checking routine and The Letter's blocking plan are ours. Vinc makes an AI film studio.
Aspect Ratios in Film Explained: 1.33 to 2.39 and 9:16, With the History and Delivery Specs
Aspect ratios in film are width divided by height. See where 1.375, 1.85, 2.39, 16:9, IMAX and 9:16 came from, and the containers cinemas and Netflix expect.